1.1The Floor Boards
The floor consists of plywood. The plywood used will be certified to meet the requirements of
Australian Commonwealth Dept. of Health (Plant Quarantine Treatment Schedule) for Timber Components ( T.C.T. ). The floor dimension should according to the IICL dimension standard. The plywood thickness is 28 mm.
1.2 Arrangement and Fixing
The plywood boards are longitudinally laid on the crossmember with a free floating flat steel at the center and two angle steel along both side rails. The plywood boards are tightly secured to each crossmember with countersunk self-tapping electro-zinc plated steel screws. These heads of the floor screws are countersunk below the level of the upper surface of the floor by 2.0 mm to 2.5 mm.
1.3 The plywood used will be a minimum of 19 plies and will be:
A. Hardwood of a specific gravity range of 0.7-0.85 at a moisture content of 12%. E.G. Keruing, Apitong.
B. Moisture content will be 13-15% when fitted to the container.
1.Each perimeter of the floor;
2.All the overlapped joints of inside;
3.All the holes for bolts and nuts;
4.Three sides of CSC plate and ventilators;
5.Between door gasket and door panel at 305 mm above lower gasket;
6.Details refer to the application of sealant drawing SBTH-1001.
Note: The application of interior sealant will be put on after water testing.
Sealant Materials: a. Chloroprene (Cargo contact area)
b. Butyl (Hidden parts)
Allowable Stacking Weight
8’- 5 49/64”
Max Gross Weight
PACIFIC CONTAINER, one of the largest manufacturers and suppliers in China, is equipped with the most advanced equipment and technology. And catering to your special requirement, our factory also offer you the customized service. Welcome to buy the singamas qingdao factory directly produce and sell 40ft high cube brand new pallet wide shipping container with us.