20Singamas Qingdao Factory Directly Produce and Sell 20 Foot High Cube Brand New Pallet Wide Shipping Container

The door consists of two door leaves, each leaf with two locking devices, four hinges, seal gaskets and door holders.

Product Details


The door consists of two door leaves, each leaf with two locking devices, four hinges, seal gaskets and door holders.

1 Door Leaf

Each leaf consists of door panel, steel door frame which consists of vertical (inner & outer) and horizontal (upper & lower) rails. They are welded together to form the rectangular door leave.

1.1 Door Panel: With 3 corrugations.

1.2 Door Frame: a) Door vertical rail

b) Door horizontal rail:

1.3 Each door is capable of swinging 270 degrees when fully opened and can be secured in that position by means of door holder. right door is so designed that the right door must be opened before the left in compliance with T.I.R. requirements.

2 Door Gasket

The door gasket is of extruded EPDM with a double lip to ensure water tightness. The upper and side gaskets are of 'J' type configuration. Bottom is of a 'C' type configuration. It is attached with sealant and secured with stainless steel retainers by stainless steel (steel shaft) rivets.

3 Hinges and Pins

Four forged hinges, providing with bushed hole, are welded to each door leaf. Each door is installed by hinge pins, washers and bushings.

Washer - brass, under the bottom of hinge

Bushing- Self-lubricating synthetic

Pin - Stainless steel

4 Locking Devices

Galvanized locking devices of SCI 8569 MN or equivalent secured to the door with nuts and bolts and has nylon bushings on the brackets. The locking devices will be hot dip. galvanized to 75 micron and will be installed after the container is painted.

Approved door lock device manufacturers: Suraloc /Haihang/ Saijin

5 Door Holder and Receptacle

A door holder per door, made of mixed nylon rope, is tied to the center-side locking rod and the receptacle (hook type) is welded to each bottom side rail to retain the door at the open position.








Max Gross Weight

Tare Weight

Max Payload




30,480 Kg

2,490 Kg

27,990 Kg

19’-10 1/2”

8’-1 13/16”



5,490 Lbs

61,710 Lbs


Door Opening

Allowable Stacking Weigh






61,000 Kg

134,505 Lbs

5,898 mm

2,426 mm

2,698 mm

2,374 mm

2,585 mm

Cubic Capacity

19’-4 1/5”

7’-11 1/2”

8’-10 11/50”

7’-9 1/5”

8’-5 3/4”

38.6 cu.m

1360 cu.ft

Special Feature

1. Internal support plates for a two-tier tray.

PACIFIC CONTAINER, one of the largest manufacturers and suppliers in China, is equipped with the most advanced equipment and technology. And catering to your special requirement, our factory also offer you the customized service. Welcome to buy the 20singamas qingdao factory directly produce and sell 20 foot high cube brand new pallet wide shipping container with us.